How to Make a Paper Gun That Shoots Bullets Easy

If you are traveling to the country or go on a trip, do not always have the opportunity to buy a baby toy guns. However, the paper at hand is often, and you can make yourself a gun, take advice from our article. In this brief article, tutorial, we will answer the question of how to make a paper gun.

Content

• 1. The gun made of paper - fun for kids and adults
• 2. Paper Gun Origami
  • 2.1. necessary materials
  • 2.2. Step-by-step instruction
• 3. Double-barreled gun made of paper
• 4. Shooting a gun made of paper
  • 4.1. necessary materials
  • 4.2. Step-by-step instruction
• 5. Volume model paper gun
  • 5.1. necessary materials
  • 5.2. Step-by-step instruction
• 6. helpful hints
• 7. conclusion

The gun made of paper - fun for kids and adults

With the manufacture of paper pistol handle even a child of primary school age. You can pick up an interesting option of several proposed methods in this article. Videos and photos to help you in the project.

Paper Gun Origami

necessary materials

Glue and tape for such a simple crafts will not be necessary, you need to take only paper and pencils / crayons for her painting. Origami - an exciting pastime that helps to develop fine motor skills and hand care, but the technique is necessary to closely examine, following the steps below.

Try together with the child to make a gun out of paper - sure, you will get great pleasure from the process.

Step-by-step instruction

How to make a gun out of paper? Initially, cut a square of landscape A4 sheet, then fold it in half. Gently iron the fold line in the middle, turn, 1 of the tear. Fold it in half, then in half again. Then bend the leaf across. Set it aside and take the next one.

Fold one edge of the inside, you can now fold the sheet in half lengthwise twice as the previous one. Fold it in half again.

Fold two parts together, attach them to each other by single hand, the upper bend back under the bottom for bending. Fold the strip along the line, turn the figure, do the same with the second strip, turn shaped as letters "G".

Expand the product, fold in half again. Second part of the carefully thread to get a hole, do it carefully, so that the paper does not tear. The pistol is ready.

Double-barreled gun made of paper

Let's look at one method of making a toy weapon. 2 Take the paper. Fold the 1st sheet in half lengthwise, then again. Fold it in half, flatten the fold line so that it is clearly traced. Expand, bend to the middle of the edge. Pay attention to the distance from the bending line to the middle of the corners of the edges are equal.

Fold the product in half along the fold line that you have designated. This part will handle.

2nd paper roll up into a tube. Pass the tube in the handle, previously folded it in half. You will have a double-barreled gun.

The child is better to use for the manufacture of toys from the album list (it is easier to bend), and an adult is recommended to take the cardboard to obtain a strong product.

Shooting a gun made of paper

necessary materials

You will need a sheet of cardboard, tape, scissors, gum, and drafts for the manufacture of bullets.

Model of thin writing paper is very soft, quickly deforms when compressed gum quickly come into disrepair, so it is recommended to apply a thin cardboard or heavy paper, intended for scrapbooking.

Step-by-step instruction

How to make a paper gun that shoots? A4 leaflet need to bend on 2 identical parts, cut along the fold line. Both halves of the need to add horizontal rectangles are obtained, in which one side will be much narrower than the second.

Now it is necessary to straighten the sheet. To fold edges to be pressed, folded along its middle, having a narrow strip of paper 4 layers. On the 2 nd half of paper must be vertically bend it in the center and corners of the rectangle to bend at right angles. Edge products to bend inward to obtain an angle less than 90 degrees.

To make the handle, the resulting triangle should be folded in half, and then roll to form a preform in the form of the letter L. Fold portion 2 as to obtain the obtuse angle: slightly spread the handle, through holes pass the resulting paper. Secure clips model, pull the bottom of the resulting tab to make the trigger.

Cut out the triangle above the handle to its size matches the groove on the top of the barrel. On the front of the barrel is necessary to notch gum. Stretch the rubber band so that it covered the whole model - from the front of the barrel to the handle.

A bullet can be made of paper lump making occupation fire safe occupation: glass and fragile items will not be affected, and bruises on such gunfire left. When you press the trigger, gum be released and the gun comes into effect, hitting the ball out of the crumpled paper.

The product can be modified to make it seem more realistic - to decorate drawings or applications as you tell a fantasy.

Volume model paper gun

necessary materials

We need to take a few sheets of A4 paper, tape, pencil, 1 rubber band, a pen (thick).

Step-by-step instruction

To make the barrel, put a pen on an A4 sheet, wrap it, to get the tube. Push the handle, pushing it out of the tube with a pencil. Glue the ends with adhesive tape products.

To manufacture the piston of smaller diameter than the stem, put pencil to a sheet, a tube twist, having stuck tape ends. Remove the pencil from the tube.

Cut a little the piston so that it amounted to a little more than 1/2 of the barrel, cover the edges with tape. By the edge of the tube glue rubber band.

For the manufacture of the handle obkrutite handle paper to get the tube, remove it by prying pencil, loosen, so that the diameter was greater. Seal the edges with tape and fold handle in half.

Insert the barrel into the handle. Make sure that it is not bent stem, cover with adhesive tape 2 of the article. Seal the edge of the tape.

For the manufacture of sight make a tube of paper, using a pencil, securing the edges with adhesive tape. Cut two pieces of tube, cut in half residue.

By the 1st of the stick first 2 pieces of adhesive tape, the sight - the gun. Insert the piston in the barrel, pull on the handle of gum. Of the tubes that are left, make bullets, cut them into small pieces so that they were held in the trunk or take the paper, crumpling it into lumps. To power shots was higher take no gum 1 and 2 and more. The pistol is ready.

helpful hints

1. The more realistic model, the more time-consuming work is necessary, it will require you patience, accuracy and time. Often parents try so that the copy is in the scale of 1: 1, as works of art, they are not suitable for games with children.
2. For the manufacture of handicrafts is recommended to use the dense drawing paper or thin cardboard (in all cases, except for origami for this technique is better to use office paper).
3. When working carefully iron the creases and follow layout.
4. Detail and color design should be given sufficient time. Ordinary gun, made in the technique of origami, will look spectacular when it will show off the inscription.
5. If you are making a gun on a template, print it on thick paper, fold the sheet in half and cut along the contour model.

conclusion

In this article we have tried to describe how to make a gun at home from improvised materials. We hope it was useful to you.

Be creative and play with your children!

martewassix.blogspot.com

Source: https://easyladys.com/en/issues/13158

Share this post